MIC2545A-1YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MIC2545A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Turn On Time | 5000 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height | 3.81mm |
| Length | 9.53mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2545A-1YN Overview
It is packaged in the manner of a Tube.It is included with the 8-DIP (0.300, 7.62mm) package as well.The LED driver is mounted as Through Hole.A USB Switch switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It comes under the family of MIC2545A.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It contains 1 functions.This operation requires the maximum output current to be decreased to 3A.Supply voltages of 5V allow for high efficiency.The LED driving board is mounted in the way of Through Hole.There is 35mOhm resistance on the LED driver.There is a maximum input voltage of 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.There are 2 inputs available.
MIC2545A-1YN Features
Supplied from 5V
Resistance of 35mOhm
MIC2545A-1YN Applications
There are a lot of Microchip Technology MIC2545A-1YN Power Switches ICs applications.
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Hot Swap
- Portable Video Game Players
- Wireless Headsets
- Set-top-box
- Solid State Drivers
- Hot-Swap Systems
- USB Protection
- Portable GPS Device
