MIC2545A-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 3A |
| Base Part Number | MIC2545A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 3A |
| Nominal Supply Current | 150μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current |
| Rds On (Typ) | 35mOhm |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2545A-2YM Overview
It is packaged in the manner of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.USB Switch is the type of switch owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.As you can see, it comes from the MIC2545A family.In order to operate, the 8 pins are used.The lighting driver's maximum output is 3AV.This operation requires the maximum output current to be decreased to 3A.This lighting driver is mounted in the way of Surface Mount.In this case, there is 35mOhm resistance in the LED driving board.There are a total of 1 channels to choose from.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.A maximum operating temperature of 85°C°C is required for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.Supply voltages as low as 2.7VV are possible.
MIC2545A-2YM Features
Resistance of 35mOhm
1 channels
MIC2545A-2YM Applications
There are a lot of Microchip Technology MIC2545A-2YM Power Switches ICs applications.
- Hot-Swap Systems
- Low Voltage I/O System Power
- Solid State Drivers
- USB3.1 Power Delivery
- Set-top-box
- Notebook PC
- PC Card Hot Swap
- USB Ports/Hubs
- Portable Music Players
- Portable Devices
