MIC2589-2YM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Feature | Latched Fault |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller, Sequencer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | -48V |
| Voltage - Supply | -80V~-19V |
| Depth | 3.9mm |
| Base Part Number | MIC2589 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 80V |
| Min Supply Voltage | 19V |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Current - Supply | 4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | CFILTER, CNLD, DRAIN, PGTIMER, OV, /PWRGD1, /PWRGD2, /PWRGD3, UV |
| Length | 8.64mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2589-2YM Overview
In the 14-SOIC (0.154, 3.90mm Width) package you will find it.Hot-swappable device is currently possible to access 1 channels.The package resembles a Tube.It's?set?up?in?the?way?of?Surface Mount.An electrical component classified as Hot Swap Controller, Sequencer belongs to this category.To ensure reliable operation, the temperature should be set to -40°C~85°C.There are -48V applications on the device.In Latched Fault, it is featured.Using a -80V~-19VV power source should be able to power the device.Hot-swappable device belongs to the MIC2589 family of numbers.For operation, 14 pins are used.Its programmable features are Current Limit, Fault Timeout, OVP, UVLO.There is currently an adequate supply of 4mA.As you can see, it is positioned in the direction of Surface Mount.For stable operation, the maximum operating temperature should be 85°C°C.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.The default output is 1.Hot Swap can handle a maximum supply voltage of 80VV.Using a low supply voltage, such as 19VV, will be feasible.Currently, 4mA is the supply current.
MIC2589-2YM Features
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
MIC2589-2YM Applications
There are a lot of Microchip Technology MIC2589-2YM hot swap controllers applications.
- High power circuit board
- Hard drive
- Overcurrent protection
- Solid state circuit breakers
- Redundant negative voltage supplies
- Base station power distribution system
- Central office switching systems
- Supply voltage monitoring
- Redundant Array of Disks (RAID)
- Current limit and current foldback limit functions
