MIC2870YFT-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-TQFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Camera Flash |
| Frequency | 2MHz |
| Base Part Number | MIC2870 |
| Number of Outputs | 2 |
| Max Supply Voltage | 5V |
| Output Current | 1.5A |
| Max Supply Current | 4.2mA |
| Voltage - Output | 5.2V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.5A |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Voltage - Supply (Max) | 5V |
| Voltage - Supply (Min) | 2.7V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2870YFT-TR Overview
The 16-UFQFN Exposed Pad package conserves board space. For the design of these LED drivers, 2 outputs are used.We are using Surface Mount as the mounting method.With high reliability and efficiency, this emerges as a DC DC Regulator.This LED driver can be operated at a temperature of -40°C~125°C TJ. It provides considerable benefits for Camera Flash.As a result, it operates on the basis of frequency 2MHz.With a base of 16, this LED light driver is configured.It is possible for undetermined failures to occur if the voltage supply falls below 2.7V.The mount is on its way to Surface Mount.This LED driver can be found under the base part number MIC2870.There is no maximum value acceptable for the supply voltage, so 5V is acceptable.It produces a voltage of 5.2V volts.As a result, it is designed to be able to deliver a maximum voltage of 5V.When the maximum supply current is below 4.2mA, the device can deliver high efficiency.It is important that the operating temperature not exceed 125°C in order to ensure stable operation.There is no current that can be supplied to the load.Stable operation requires an operating temperature greater than -40°C.
MIC2870YFT-TR Features
Available in the 16-UFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2MHz
MIC2870YFT-TR Applications
There are a lot of Microchip Technology MIC2870YFT-TR LED Driver ICs applications.
- Refrigeration lighting
- LED Lightings for Industrial Equipment
- Down lighting
- Down lights
- Industrial LED Lighting: Image Recognition Devices
- OLED power supply for portable equipment
- Linear fluorescent
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
