MIC4126YMME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~20V |
| Base Part Number | MIC4126 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.5A |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 70 ns |
| Rise / Fall Time (Typ) | 20ns 18ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4126YMME Overview
For greater flexibility, the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted.A package of Tube has been used.Configuration is based on 2 drivers.Gate drivers is mounted in the way of Surface Mount.Using a 4.5V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.The input type for this program is Inverting.You will find various related parts under the base part number MIC4126.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.There is an output current limit of 1.5A for this device.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current supported by the device is 1.5A.Temperatures greater than 125°C are not allowed.-40°C is the minimum operating temperature.During operation, the supply voltage of 20V is its maximum value.In order for the device to operate, a supply voltage of 4.5V must be applied.Operating channels are set to 1.
MIC4126YMME Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC4126YMME Applications
There are a lot of Microchip Technology MIC4126YMME gate drivers applications.
- Pulse transformer drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- serial peripheral interface (SPI), I2C
- Automotive Applications
- White Goods - Air Conditioner, Washing Machine,
- AC-DC Inverters
- Industrial Power Supplies
- Uninterruptible Power Supplies (UPS)
- Motor controllers
