MIC4424ZN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 960mW |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | MIC4424 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 3A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 33 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 33 ns |
| Rise / Fall Time (Typ) | 28ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4424ZN Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.There is a package in the form of Tube.It's mounted on the way to Through Hole.A supply voltage of 4.5V~18V demonstrates its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number MIC4424.Mosfet driver is mounted using the Through Hole method.A total of 8 pins are available on the device.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 3A.Based on its basis, it integrates 2 outputs.3A is the maximum output current supported by the device.Based on the maximum power dissipation of 960mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.25mV is the output voltage.
MIC4424ZN Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 960mW
MIC4424ZN Applications
There are a lot of Microchip Technology MIC4424ZN gate drivers applications.
- Commercial air-conditioning (CAC)
- Motor Control
- High-voltage isolated DC-DC converters
- Motor Controls
- Telecom switch mode power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- Motor controllers
- Topologies
- Portable Media Players
