MIC5891YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC5891 |
| Number of Outputs | 8 |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Operating Supply Voltage | 9V |
| Interface | Strobe, Serial |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 5V~50V |
| Number of Input Lines | 1 |
| Turn On Time | 2 μs |
| Number of Output Lines | 9 |
| Supply Voltage1-Nom | 50V |
| Built-in Protections | TRANSIENT |
| Height | 3.3mm |
| Length | 19.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC5891YN Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 16-DIP (0.300, 7.62mm) package.The LED driver is mounted as Through Hole.Latched Driver is the type of switch owned by it.It is recommended that the temperature be set to -55°C~125°C TA for reliable performance.By default, it is set to output 8.With a supply voltage of 4.5V~15V, the LED driving board operates.The maximum output voltage is Bipolar volts.It is a member of the MIC5891 family.In total, there are 16 terminations.The operation is performed through the 16 pins.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 500mA.Through Hole is mounted in the way of this lighting driver.It is set to 500mA in this case.When using this LED driving board, it is recommended that the supply voltage is set to 9V.
MIC5891YN Features
MIC5891YN Applications
There are a lot of Microchip Technology MIC5891YN Power Switches ICs applications.
- Gaming
- USB Protection
- Set-Top Boxes
- Portable/Handheld Devices
- Various applications equipped with buttons
- PDAs
- Notebook PC
- Portable GPS
- Handheld Devices
- PC Cards
