MK20/1-B-100W
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | Cylinder |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~70°C TA |
| Published | 2006 |
| Series | MK20/1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Termination Style | Wire Leads |
| Output Type | SPST-NO |
| Lead Length | 100mm |
| Operating Supply Voltage | 175V |
| Contact Resistance | 150mOhm |
| Insulation Resistance | 10MOhm |
| Operating Supply Current | 500mA |
| Nominal Supply Current | 500mA |
| Throw Configuration | SP |
| Response Time | 100 µs |
| Switching Voltage | 30V |
| Sensing Method | Magnetic |
| Housing | PBT 30%GF |
| Must Operate | 10 ~ 25AT |
| Must Release | 4 ~ 22AT |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MK20/1-B-100W Overview
Packages of Cylinder are used for magnetic position sensor modules. When operating, the magnetic position sensors modules should apply a voltage of 175V. The current drawn by the magnetic position sensors modules could be 500mA. There will generally be 500mA current drawn by this sensors module.
MK20/1-B-100W Features
Package / Case: Cylinder
MK20/1 Series
Operating Temperature: -30°C~70°C TA
Operating Supply Voltage: 175V
Operating Supply Current: 500mA
Response Time: 100 μs
MK20/1-B-100W Applications
There are a lot of Standex-Meder Electronics MK20/1-B-100W Magnetic Position Sensors Modules applications.
- Angle sensing
- Robotics control
- Monitor protections of the safety gates
- White goods
- Medication dispensing control
- Magnetic encoders
- Steering position
- Industrial process control
- Lighting actuation slave sensor
- Motor and fan control
