MLX91208LDC-CAV-000-SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| Published | 2016 |
| Series | Triaxis® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | DC~200kHz |
| Output | Ratiometric, Voltage (Selectable) |
| Current - Supply (Max) | 14mA |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 14mA |
| Accuracy | ±0.1% |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.75% |
| Sensitivity | 40mV/mT |
| For Measuring | AC/DC |
| RoHS Status | RoHS Compliant |
MLX91208LDC-CAV-000-SP Overview
In order to ensure safety, the current sensors are placed in 8-SOIC (0.154, 3.90mm Width) packages. As a safety measure, the current sensors are packaged inside the Bulk to prevent damage to the devices. Current sensors should only output 14mA current. In order for current sensors to be effective, their current supply should not exceed 14mA. In order for these current sensors to function, the operating temperature cannot be lower than -40°C. It is recommended, however, to set the maximum operating temperature of the current sensors to 150°C.
MLX91208LDC-CAV-000-SP Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: DC~200kHz
8-SOIC (0.154, 3.90mm Width) Package
MLX91208LDC-CAV-000-SP Applications
There are a lot of Melexis Technologies NV MLX91208LDC-CAV-000-SP Current Sensors applications.
- Uninterruptable Power Supllies (UPS)
- Power factor correction
- Uninterruptible Power Supplies(UPS)
- Overcurrent protection
- Overcurrent Detection
- General purpose inverters
- Inverter and H-bridge current measurements
- Power supply management
- Electrical drives
- Battery supplied applications
