MM74HCT374SJX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 46 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT374SJX Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74HCT series. There should be no greater frequency than 30MHzon its output. There are 1 elements in it. There are 20 terminations,The 74HCT374 family contains this object. The power source is powered by 5V. This JK flip flop has a 10pFfarad input capacitance. A device of this type belongs to the family of HCT. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 8bits. In order to achieve its superior flexibility, 8 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A power supply of 5Vis required to operate it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. It operates with 3 output lines. Despite external influences, it consumes 8μAof quiescent current.
MM74HCT374SJX Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT374SJX Applications
There are a lot of ON Semiconductor MM74HCT374SJX Flip Flops applications.
- Buffer registers
- Automotive
- Bounce elimination switch
- Data Synchronizers
- Clock pulse
- Supports Live Insertion
- Consumer
- 2 – Bit synchronous counter
- Load Control
- Frequency Dividers
