MM74HCT74N
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.62g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 4.8mA |
| Clock Frequency | 27MHz |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 21 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4.8mA 4.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
MM74HCT74N Overview
As a result, it is packaged as 14-DIP (0.300, 7.62mm). You can find it in the Tubepackage. As configured, the output uses Differential. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. Its output frequency should not exceed 27MHz Hz. During its operation, it consumes 2μA quiescent energy. The 74HCT74family includes it. The input capacitance of this JK flip flopis 5pF farads. In this case, the electronic component is mounted in the way of Through Hole. This board has 14 pins. This device's clock edge trigger type is Positive Edge. Despite its superior flexibility, it relies on 2 circuits to achieve it. In addition to its maximum design flexibility, the output current of the T flip flop is 4.8mA. To operate, the chip has a total of 1 output lines.
MM74HCT74N Features
Tube package
74HCT series
14 pins
MM74HCT74N Applications
There are a lot of ON Semiconductor MM74HCT74N Flip Flops applications.
- Event Detectors
- Buffer registers
- ESCC
- Individual Asynchronous Resets
- Frequency division
- Safety Clamp
- Convert a momentary switch to a toggle switch
- Balanced Propagation Delays
- ATE
- Storage Registers
