MP1906DS-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Voltage - Supply | 10V~16V |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Max Output Current | 350mA |
| Max Supply Current | 1.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Turn-Off Delay Time | 150 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 350mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| High Side Voltage - Max (Bootstrap) | 80V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP1906DS-LF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is packaged in the way of Tube.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.In the absence of a power supply voltage of 10V~16V V, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is mounted using the Surface Mount method.Devices have 8 pins available.There is an output current limit of 350mA for this device.There can be a voltage up to 80V on the high-side (Bootstrap).In terms of its basis, there are 1 outputs integrated.This device has a maximum power dissipation of 1.4W, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 1.5mA.
MP1906DS-LF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 80V
Maximum power dissipation of 1.4W
MP1906DS-LF Applications
There are a lot of Monolithic Power Systems Inc. MP1906DS-LF gate drivers applications.
- AC-DC Inverters
- Solar power supplies
- Motor Drives
- Telecom switch mode power supplies
- Line drivers
- General Purpose 3-Phase Inverter
- Portable Media Players
- UPS systems
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
