MP2307DN-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 20V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 23V |
| Voltage - Input (Min) | 4.75V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.3mA |
| Output Configuration | Positive |
| Max Output Voltage | 20V |
| Voltage - Output (Min/Fixed) | 0.925V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 340kHz |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 925mV |
| Voltage - Output (Max) | 20V |
| Length | 4.9mm |
| Width | 3.905mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP2307DN-LF-Z Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. This harley voltage regulator has 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package. There are 1 outputs on DC DC switching regulator. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. This voltage regulator 12v reaches a switching frequency of 340kHz. Input voltage 4.75V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.925V. Its 260 peak reflow temperature makes this regulator essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. There is a possibility that DC DC switching regulator can give voltage at 20V volts. Ideally this switch regulator should have an output voltage of about 925mV at the very least. The maximum output current reaches 3A A to meet the switching regulator operation requirements. 20V's maximal output voltage allows adjusting voltage regulator to operate easily. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 20V. DC-DC switching regulator with supply voltage 23V.
MP2307DN-LF-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
Operating supply voltage of 23V
MP2307DN-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2307DN-LF-Z Voltage Regulators applications.
- Electric water heaters
- Access control systems
- Energy management systems
- Computer application technology
- Flexible manufacturing cells
- Adjustable voltage or current linear circuits
- Computer monitoring equipment of building
- Solar power plants
- Packaging
- Scientific testing
