MP3306EG-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-TFQFN |
| Number of Pins | 12 |
| Supplier Device Package | 12-QFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 690kHz |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Max Output Voltage | 30V |
| Voltage - Output | 30V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 12V |
| Output Current per Channel | 1.8A |
| Current - Output / Channel | 1.8A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 690kHz |
| Voltage - Supply (Max) | 12V |
| Voltage - Supply (Min) | 3V |
| Nominal Input Voltage (DC) | 5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP3306EG-LF-P Overview
The 12-TFQFN package is used for saving board space. Typically, LED drivers have 1 outputs.Surface Mount is used to mount the led driver.It emergys as a DC DC Regulator with high efficiency and reliable performance.-40°C~125°C TJ is the operating temperature and it works fine.The benefits are considerable for Backlight.The system operates on the basis of the frequency 690kHz.It is configured with 12 pins as its base.A voltage supply less than 3V could result in undetermined failures.It has been mounted on Surface Mount.It's acceptable for the voltage to be 12V.A voltage of 30V is produced by it.In this case, the maximum value will be 12V.The input voltage must be minimally 3V.The allowable maximum value of supply current reaches 12V.For stable operation, it is recommended that the operating temperature not exceed 125°C.Stable operation requires a temperature higher than -40°C.This electronic component may perform its functions fully if the switching frequency is maintained at 690kHz.Voltages should not exceed 30V volts at the output.Transmission is available on 1 channels.
MP3306EG-LF-P Features
Available in the 12-TFQFN package
Operating temperature of -40°C~125°C TJ
Frequency of 690kHz
Switching frequency of 690kHz
MP3306EG-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP3306EG-LF-P LED Driver ICs applications.
- Panel lighting
- Other Electronic Devices
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- OLED power supply for portable equipment
- Street lighting
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
