MP3384LGQ-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-QFN (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1.25MHz |
| Number of Outputs | 4 |
| Output Type | Adjustable |
| Max Output Current | 1.3A |
| Number of Channels | 4 |
| Max Supply Voltage | 25V |
| Power Dissipation | 2.1W |
| Output Current | 60μA |
| Max Supply Current | 1.8mA |
| Max Output Voltage | 50V |
| Voltage - Output | 50V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 25V |
| Output Current per Channel | 30mA |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Max) | 25V |
| Voltage - Supply (Min) | 3V |
| Nominal Input Voltage (DC) | 12V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP3384LGQ-P Overview
There is a 16-VFQFN Exposed Pad package on the board that is used to save space. LED drivers are designed with 4 outputs.Surface Mount is used to mount the led driver.It emerges as a DC DC Regulator with high efficiency.This LED driver can be operated at a temperature of -40°C~125°C TJ. There are considerable benefits for Backlight.The system operates at a frequency of 1.25MHz.It has a base of 16 pins.If the voltage supply is below 3V, undetermined failures may occur.The mount is in the way of Surface Mount.25V is an acceptable voltage.It produces a voltage of 50V volts.There is a maximum value of 25V that can be used with it.With 4.5V as the minimal input voltage, it operates.When the maximum supply current is allowed, it reaches 25V.When the maximum supply current is less than 1.8mA, this device is capable of providing high efficiency.An operating temperature above 125°C should ensure stable operation.In this case, the load can only be supplied with 60μA current.Stable operation requires a temperature greater than -40°C.The electronic component can function fully when the switching frequency is maintained at 1.25MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 1.3A.Ideally, the output voltage should not exceed 50V.A total of 4 channels are currently available for transmission.There is a type Adjustable output on this device.
MP3384LGQ-P Features
Available in the 16-VFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1.25MHz
Switching frequency of 1.25MHz
MP3384LGQ-P Applications
There are a lot of Monolithic Power Systems Inc. MP3384LGQ-P LED Driver ICs applications.
- Scanners and Handy Terminals
- Stage Lighting and Signage
- A- lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- General lighting
- Museum lighting
- Down lights
