MXL1013DS8+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 113 dB |
| Voltage - Supply, Single/Dual (±) | 5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 0.038μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 11V |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Current - Quiescent (Max) | 550μA |
| Voltage Gain-Min | 500000 |
| Voltage - Input Offset (Max) | 300μV |
| Current - Input Bias (Max) | 30nA |
| CMRR, PSRR (Typ) | 114dB CMRR, 117dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MXL1013DS8+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The part will be shipped by Tube .The comparator has 8 terminals.The component belongs to the Operational Amplifier family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .Electronic comparator can be classified as a General Purpose chip.This is a 2 element comparator.The board includes 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The device can be run with 5/+-15V power supplies.Often found in ADC circuits, this device is packed in TAPE AND REEL .
MXL1013DS8+T Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
MXL1013DS8+T Applications
There are a lot of Maxim Integrated MXL1013DS8+T linear comparators applications.
- Wearable Devices
- Limit Comparators
- Point of load regulators
- Notebooks and PDAs
- Wide Range VCO; MOS Clock Timers
- Battery management and protection
- Threshold Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Hand-Held Electronics
- Body Control Modules
