banner_page

MXL1016CS8+

Surface Mount Tube 20mA mA 10 ns μs Linear Comparators 69.54dB dB 10μA pA 2003 -3mA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MXL1016CS8+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 218
  • Description: Surface Mount Tube 20mA mA 10 ns μs Linear Comparators 69.54dB dB 10μA pA 2003 -3mA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch
Subcategory Comparator
Max Power Dissipation 471mW
Technology TTL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MXL1016
Pin Count 8
Output Type Complementary, TTL
Power Supplies 5/+-5V
Number of Circuits 1
Nominal Supply Current -3mA
Output Current 20mA
Max Supply Current -3mA
Propagation Delay 14 ns
Quiescent Current 35mA
Response Time 10 ns
Common Mode Rejection Ratio 100 dB
Voltage - Supply, Single/Dual (±) 5V~10V ±2.5V~5V
Input Offset Voltage (Vos) 3mV
Neg Supply Voltage-Nom (Vsup) -5V
Voltage Gain 69.54dB
Supply Voltage Limit-Max 7V
Input Bias Current 10μA
Neg Supply Voltage-Max (Vsup) -7V
Current - Quiescent (Max) 35mA
Voltage - Input Offset (Max) 3mV @ ±5V
Current - Input Bias (Max) 10μA @ ±5V
CMRR, PSRR (Typ) 96dB CMRR, 100dB PSRR
Current - Output (Typ) 20mA
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MXL1016CS8+ Overview


The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a Complementary, TTL output type for this comparator.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as with Latch .The device includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator has 8 pins.You may wish to search MXL1016 for more solutions that address your specific needs.There is a quiescent current of 35mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of -3mA .A current supply greater than -3mA may result in the comparator malfunctioning.This device requires 5/+-5V power supplies to operate.Based on the voltage formula, the voltage gain of the part is 69.54dB .

MXL1016CS8+ Features


Complementary, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 35mA
Voltage Gain: 69.54dB

MXL1016CS8+ Applications


There are a lot of Maxim Integrated MXL1016CS8+ linear comparators applications.

  • Building automation
  • Hand-Held Electronics
  • Infotainment & cluster
  • High-Speed Differential Line Receiver
  • Zero-Crossing Detectors
  • Point of load regulators
  • Threshold Detectors
  • Body Control Modules
  • Motor drives
  • Factory automation & control

Write a review

Note: HTML is not translated!
    Bad           Good