N74F374N,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F374 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 165MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 86mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
N74F374N,602 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. It is at 0°C~70°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. JK flip flop is a part of the 74Fseries of FPGAs. There should be no greater frequency than 165MHzon its output. The element count is 1 . As a result, it consumes 86mA of quiescent current without being affected by external factors. There are 20 terminations,D latch belongs to the 74F374 family. The power source is powered by 5V. It belongs to the family of electronic devices known as F/FAST. This RS flip flops is a part number FF/Latches. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. The system runs on a power supply of 5V watts. The D flip flop has no ports embedded.
N74F374N,602 Features
Tube package
74F series
5V power supplies
N74F374N,602 Applications
There are a lot of NXP USA Inc. N74F374N,602 Flip Flops applications.
- Buffered Clock
- Frequency division
- Latch
- Single Down Count-Control Line
- Cold spare funcion
- Balanced 24 mA output drivers
- Convert a momentary switch to a toggle switch
- Asynchronous counter
- Load Control
- Data Synchronizers
