Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NB2308A |
Pin Count |
16 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
60mA |
Frequency (Max) |
133.3MHz |
Output Characteristics |
3-STATE |
Halogen Free |
Halogen Free |
Input |
Clock |
Ratio - Input:Output |
1:8 |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Number of True Outputs |
8 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
NB2308AI5HDTG Overview
As a clock IC, it uses the Tube package. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 16 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. In this clock generator, Clock is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 133.3MHz. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. There should be 3V~3.6V provided with this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. This electronic component can be classified as a Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. NB2308A is the base part number for finding related electronic parts. There are a number of 16 pins that are available on the frequency synthesizers. Supply voltage 3.3V is what time clock generator can handle. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. This digital clock generator is configured with 8 high true output enable pins.
NB2308AI5HDTG Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AI5HDTG Applications
There are a lot of ON Semiconductor NB2308AI5HDTG Clock Generators applications.
- Electronic equipment
- Signal demodulation
- Coherent carrier tracking
- Microwave backhaul IF
- Multi-function printers
- 10 Gigabit Ethernet
- CPUs
- Radio receivers
- Reference signals to RF systems
- Wireless infrastructure