NB3N51034DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Frequency Stability | 20 ppm |
| Base Part Number | NB3N51034 |
| Output | HCSL, LVDS |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 135mA |
| Load Capacitance | 20pF |
| Max Supply Current | 135mA |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, OTHER |
| Propagation Delay | 10 μs |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:4 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | Yes/No |
| Height | 1.2mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB3N51034DTG Overview
It is packaged using the Tube method since it is a clock IC. Clock PLL is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. As you can see, it consists of 20 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from Clock, Crystal, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. Incorporating CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, OTHER. There are 3.135V~3.465V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in HCSL, LVDS logic that can be used with this clock generator. There is a 20-bit clock-generating IC built specifically for microprocessors in this frequency generator. NB3N51034 is the base part number for finding related electronic parts. The clock PLL has 20 pins that are available. Supply voltage 3.3V is what clock generator can handle. The clock PLL is generally classified as a Clock Generators device. Clock PLL is configured with 4 output. Frequency generator is able to reali200MHze high efficiency when operating at a frequency of 200MHz. In order for it to fully perform time clock generator's functions, it needs a supply current of 135mA. This RF synthesizer operation requires a maximum current of 135mA. In terms of load capacitance, analog clock generator is capable of delivering 20pF.
NB3N51034DTG Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 20pF
NB3N51034DTG Applications
There are a lot of ON Semiconductor NB3N51034DTG Clock Generators applications.
- Myriad digital applications
- Small signal recovery
- Mixed mode (analog and digital) applications
- GPS systems
- MRI
- Main oscillator in receiver
- 1 Gigabit Ethernet
- Closed circuit systems
- Camera systems
- Multiplexing communication
