NB3W1200LMNG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Weight | 206.29948mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133MHz |
| Base Part Number | NB3W1200 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Operating Supply Current | 180mA |
| Nominal Supply Current | 330mA |
| Propagation Delay | 100 ps |
| Quiescent Current | 180mA |
| Family | NB3 |
| Logic Function | Buffer |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:12 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | No/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Schmitt Trigger Input | No |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NB3W1200LMNG Overview
This clock IC is packaged using the Tray method. As part of the 64-VFQFN Exposed Pad package, this clock generator is embedded. As a result of this, we can find 64 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by Clock as its input. 1 circuits are implemented to access the electronic component's full performance. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 3.465V of power as a maximum supply voltageClock generator ic works with 3.135V~3.465V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. This part number is related to its related electronic parts. The clock PLL has 64 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. 12 signal outputs allow for maximi12ation of output frequency. At 0.05 ns Max, this clock generator offers low timing skew. The NB3 family of parts can be used to find electronic parts that are similar to each other. Using a frequency of 133MHz allows frequency synthesizer to achieve high efficiencies. For its full function, a supply current of 180mA is required. On the basis of input data, this RF synthesizer combines clock logic function Buffer.
NB3W1200LMNG Features
Available in the 64-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
NB3W1200LMNG Applications
There are a lot of ON Semiconductor NB3W1200LMNG Clock Generators applications.
- Cable television converter boxes
- Carrier synchronization in wired communication
- Wireless base station for LTE, LTE-advanced
- High-speed communication applications
- Infotainment systems
- CPUs
- Motor speed controls
- Bluetooth receivers
- Mobile telephones
- Myriad digital applications
