NC7SZ175L6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7SZ175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 9.8 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ175L6X Overview
The item is packaged in 6-UFDFNcases. The Tape & Reel (TR)package contains it. T flip flop uses Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 1.65V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 7SZ series. Its output frequency should not exceed 175MHz. 6terminations have occurred. If you search by 7SZ175, you will find similar parts. A voltage of 1.8V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. A device of this type belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 6. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. There are 1bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 3.3V watts. It consumes 1μA of quiescent current without being affected by external factors. 1 channels are available.
NC7SZ175L6X Features
Tape & Reel (TR) package
7SZ series
6 pins
1 Bits
3.3V power supplies
NC7SZ175L6X Applications
There are a lot of ON Semiconductor NC7SZ175L6X Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Frequency division
- 2 – Bit synchronous counter
- Data Synchronizers
- Guaranteed simultaneous switching noise level
- Functionally equivalent to the MC10/100EL29
- Power down protection
- Frequency Dividers
- Single Up Count-Control Line
- Differential Individual
