NCL30081BSNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Frequency | 65kHz |
| Base Part Number | NCL30081 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 20V |
| Max Supply Current | 1mA |
| Topology | Flyback |
| Min Input Voltage | 8V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Switching Frequency | 65kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCL30081BSNT1G Overview
Additionally, there is a SOT-23-6 Thin, TSOT-23-6 package for saving space.It has 1 outputs for LED drivers.Surface Mount represents this mounting method.When it emerges as a AC DC Offline Switcher, it shows high-performance and reliability.At -40°C~125°C TA, the led driver is capable of operating.Frequency 65kHz is the basis of operation.A termination of 6 is used to operate the LED driver.It is configured with 6 pins as its base.Failures may occur if the voltage supply is below 8.8V.Surface Mount has been mounted with the device.It is under the base part number NCL30081 that the LED driver can be found.The supply voltage of 20V is an acceptable maximum value.In addition, it is equipped with a total of 6 pins.Further, its characteristics allow it to be classified as Display Drivers.When the input voltage is set to 8V, it operates.It is possible to supply current up to 20V.As long as the maximum supply current is less than 1mA, this device is capable of providing high efficiency.It is necessary to have 12V voltages inside systems to power them.This electronic component can fully perform when the switching frequency is 65kHz.The voltage at the output terminal is 200V.
NCL30081BSNT1G Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Operating with the supply voltage of 12V
Switching frequency of 65kHz
Output voltage of 200V
NCL30081BSNT1G Applications
There are a lot of ON Semiconductor NCL30081BSNT1G LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- LED backlight driver for LCD displays for portable equipment
- Refrigeration lighting
- LED Lightings for Industrial Equipment
- Linear fluorescent
- General lighting
- Architectural lighting
- Museum lighting
