NCP1053P44G
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 400mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 650μA |
| Output Current | 6.3mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Max Output Voltage | 40V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1053 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
NCP1053P44G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.This AC/DC converter is suitable for operation in the range of 7.5V~10V supply voltage (Vcc/Vdd).Total terminations are 8 .A ac/dc converter with 7 pins is available.There are 7 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .Similar acdc converters can be found using the NCP1053 family.There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .We have set the output current to 6.3mA .AC to DC converter is able to reach high efficiency when its frequency is 44kHz .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter generates 20W .It is possible to use the AC to DC inverter with an input voltage less than 85V V.
NCP1053P44G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 6.3mA
NCP1053P44G Applications
There are a lot of ON Semiconductor NCP1053P44G AC DC Converters applications.
- Humidifier
- Vacuum Cleaner
- PDAs
- Switching AC-DC Adapter
- Home appliances
- Automotive Infotainment
- Low-Voltage I/O System Power
- Battery Chargers
- Universal Off-Line Power Supplies
- Adapter/Charger for Cell
