NCP1053ST136T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1053 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1053ST136T3 Overview
TO-261-4, TO-261AA is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.As long as the supply voltage (Vcc/Vdd) is within the range of 7.5V~10V , the AC/DC converter may be used.There are a total of 4 terminations.The ac/dc converter has a total of 4 pins.In this ac-dc converter, there are 4 pins.A similar acdc converter can be searched by using the NCP1053 family.A total of 1 outputs are to be processed.AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is able to reach high efficiency when its frequency is 136kHz .The input voltage with the maximal value of 8.5V can be ensured on the basis of unique technique.Ac to dc inverters can only be powered at a maximum current of 2A .
NCP1053ST136T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1053ST136T3 Applications
There are a lot of ON Semiconductor NCP1053ST136T3 AC DC Converters applications.
- Vacuum Cleaner
- AC/DC LED Driver applications
- Standby power supplies for VCR
- Power tools fast chargers with trickle and on/off
- Standby Power for General Off-Line Applications
- Laptops
- AC-DC Output Power Conversion Applications
- Laptops and personal digital assistants
- Adapter/Charger for Cell
- Adapters
