NCP1063AP060G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 7.8W |
| Max Power Dissipation | 15.5W |
| Max Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 7V~20V |
| Topology | Buck, Flyback |
| Min Input Voltage | -300mV |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 20V |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Power, Over Temperature, Short Circuit |
| Duty Cycle | 66% |
| Output Isolation | Either |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 9V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1063AP060G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.Switching frequency reaches 100kHz Hz.Within the range of 7V~20V supply voltage (Vcc/Vdd), it can be used.It contains 7 pins.Through Hole is the recommended mounting method for the ac dc converters.You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 20V voltage.An input voltage of less than -300mV volts is acceptable for use with this AC to DC inverter.A AC to DC power converter's input voltage (AC) should not exceed 265V .
NCP1063AP060G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1063AP060G Applications
There are a lot of ON Semiconductor NCP1063AP060G AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- LED Driver
- Tablets
- Adapters for Handheld Electronics
- Power Adaptors
- WiFi Wireless
- AC?DC USB chargers for Cameras
- Chargers for cell/cordless phones
- Air conditioners
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
