banner_page

NCP1071P065G

7 Terminations6.3V~10V 7 Pin AC to DC power converter65kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1071P065G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 152
  • Description: 7 Terminations6.3V~10V 7 Pin AC to DC power converter65kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
HTS Code 8542.39.00.01
Subcategory Switching Regulator or Controllers
Power Rating 14W
Max Power Dissipation 14W
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Qualification Status Not Qualified
Operating Supply Voltage 8.6V
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 350mA
Voltage - Supply (Vcc/Vdd) 6.3V~10V
Topology Flyback
Min Input Voltage 85V
Control Mode CURRENT-MODE
Frequency - Switching 65kHz
Max Input Voltage 265V
Rise Time 20ns
Fall Time (Typ) 10 ns
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 72 %
Duty Cycle 68%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.2V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height 4.95mm
Length 10.16mm
Width 7.11mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP1071P065G Overview


A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.This AC DC converter employs SWITCHING CONTROLLER analog IC type.When the switching frequency reaches 65kHz , the process is complete.Vcc/Vdd can be used within the range of 6.3V~10V supply voltage.There are a total of 7 terminations.On the ac/dc converter, there are 7 pins.The ac dc converters is suitable for mounting by Through Hole .The ac to dc conversions are included in Switching Regulator or Controllers .350mA is set as the output current.SVHC for REACH can be found in the standard No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The AC to DC inverter may be operated with an input voltage less than 85V volts.At 8.6V supply voltage, the interface IC conducts.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .

NCP1071P065G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 350mA
Operating Supply Voltage at the range of 8.6V

NCP1071P065G Applications


There are a lot of ON Semiconductor NCP1071P065G AC DC Converters applications.

  • Standby Power Supplies
  • SMPS house keeping power supplies
  • Air Conditioning
  • Open Frame Switching Power Supply
  • Universal Off-Line Power Supplies
  • DVD players
  • Wireless System
  • Standby Power for General Off-Line Applications
  • Auxiliary Power Supply
  • Wall switches

Write a review

Note: HTML is not translated!
    Bad           Good