NCP1083DEG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 hours ago) |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | NCP1083 |
| Pin Count | 20 |
| Output Voltage | 9V |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Output Current | 1.1A |
| Max Output Voltage | 9.6V |
| Topology | Flyback |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 57V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 8.4V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Max Duty Cycle | 80 % |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Switching Frequency | 500kHz |
| Auxiliary Sense | Yes |
| Height | 950μm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1083DEG Overview
The package Tube includes it.The packaging is in 20-TSSOP (0.173, 4.40mm Width) Exposed Pad's style.Controller (PD), DC/DC is the type of PoE controller.There is an increase in the number of channels strong/weak as follows: 1.For the sake of ensuring the reliability of the Po E controller, it functions at a temperature of -40°C~85°C.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.It is possible to identify its Po E controllers based on its base part number NCP1083.A 20 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.As you can see from the image, it is equipped with 20 pin count.A Po E controller like this is included in Switching Regulator or Controllers.It is designed with 20 pins.1.1A features maximum design flexibility due to its output current.As a result of this power over ethernet controller's output voltage being 9V, this voltage is the output voltage.A maximum input voltage of 57V can be applied to this power over ethernet PoE controller.The minimal input voltage of this power over the ethernet controller is 0V.
NCP1083DEG Features
Tube package
20 pin count
20 pins
The output current of 1.1A
NCP1083DEG Applications
There are a lot of ON Semiconductor NCP1083DEG Power Over Ethernet (PoE) Controllers applications.
- Single-Port PSE Power Injectors
- Single-Port PSE End-Point Applications
- Non-Compliant, Application Specific Devices
- Commercial Information Displays
- 4PPOE
- Security Cameras
- PoE powered device appliances
- Midspan Applications
- Security Cameras
- WLAN Access Points
