NCP1582DR2G
| Parameters | |
|---|---|
| Output Configuration | Positive |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 400kHz |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 75% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1582 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
NCP1582DR2G Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 4.5V~13.2V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. The switching controller can be switched at 350kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Phase Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "NCP1582". Pins number 8 of switching converter in total. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 800mV. normally, the dc dc regulator's output current is 700mA, which you should keep in mind when starting a project. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 400kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 12V.
NCP1582DR2G Features
Transistor Driver Outputs
Switching Frequency: 350kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
NCP1582DR2G Applications
There are a lot of ON Semiconductor NCP1582DR2G DC to DC converter applications.
- Automatic plug-in machines
- Digital precision reference circuits
- Balance equipment
- Servo drive system
- Industrial controllers
- seismic instrument power circuits
- Machining centers
- Sink circuits
- CMM
- Injection molding machinery
