NCP1606APG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Voltage - Supply | 10.3V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10.3V |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Switcher Configuration | BOOST |
| Switching Frequency-Max | 70kHz |
| Mode | Critical Conduction (CRM) |
| Current - Startup | 20μA |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP1606APG Overview
In a 8-DIP (0.300, 7.62mm) package, it is available.The package is Tube-shaped.As far as the mounting type of the device is concerned, it is Through Hole.In order to operate, it should be plugged into 10.3V~20V's voltage supply.Currently, the device is set to operate at a frequency of -40°C~125°C.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.8 terminals are found on the gadget.20μA is the startup current.The pins on it are arranged in a 8-shape.Depending on the input voltage, it can operate at a minimum of 10.3V volts.Its input voltage (Max) is 20V.
NCP1606APG Features
NCP1606APG Applications
There are a lot of Rochester Electronics, LLC NCP1606APG PFC PMICs applications.
- HVAC (Heating, Ventilation, and Air Conditioning)
- Disk drivers
- Smartcard
- Analog datalogger
- HMI (Human-Machine Interface)
- Smart buildings
- DSP power
- Automated test equipment
- Smart manufacturing
- CAV (Connected and Automated Vehicle)
