NCP1800DM41R2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1800 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.1V |
| Input Voltage-Nom | 6V |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 20mA |
| Max Output Voltage | 4.41V |
| Max Input Voltage | 16V |
| Supply Current-Max (Isup) | 0.25mA |
| Switcher Configuration | SINGLE |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1A |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1800DM41R2G Overview
The Tape & Reel (TR) package contains it.An included version of it is available in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Mounting type for the device is Surface Mount.It is recommended to set the temperature to -20°C~85°C TA for reliable performance.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.To charge the device, you will need to supply it with Constant - Programmable of current.There are related parts to this device according to the base part number NCP1800.8 terminations are present.There are 8 pins on it, so it has a very simple design.It is possible to program features such as Current.The device indicates 1A charging current as its maximum.There are 8 pins required in order for the product to function.This device can be operated at an input voltage of 16V without being damaged.Using a 4.1V output voltage results in high efficiency.It is performed with a current output of 20mA for the output of the operation.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 2.5VV.In order to mount it, it has to align itself with Surface Mount.In most cases, the maximum supply voltage (Vsup) is set to 0.25mA.6V is the input voltage for the device.16V is the maximum input voltage it can handle.The maximum output supply voltage is reduced to 4.41V to fulfill the operation requirements.
NCP1800DM41R2G Features
Power Management Circuits subcategory
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NCP1800DM41R2G Applications
There are a lot of ON Semiconductor NCP1800DM41R2G Battery Chargers ICs applications.
- Smart power strips
- Painting boat
- Mobile lighting
- Fleet management
- USB power delivery (USB-C) devices
- Electricity bank
- Ruggedized notebooks/tablet computers
- Instruments and meters
- Automotive electronics
- Maintenance shops
