NCP2890AFCT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, FCBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 650mW |
| Voltage - Supply | 2.2V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP2890 |
| Pin Count | 9 |
| Output Type | 1-Channel (Mono) |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.7mA |
| Power Dissipation | 650mW |
| Output Power | 1.08W |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 1.08W |
| Max Output Power x Channels @ Load | 1.08W x 1 @ 8 Ω |
| Height Seated (Max) | 0.66mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP2890AFCT2G Overview
There is a device embedded in 9-WFBGA, FCBGA .The device is in the form of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.1-Channel (Mono) is used for its output.There is Class AB type of electrical device associated with this device.The computer or other communication device has 9 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Surface Mount .There is 2.2V~5.5V supply voltage for this electrical device.1 channels are present on the device.During operation, the value Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.A temperature greater than -40°C~85°C TA should not be used.In addition, it is equipped with 9 pins.As part of Audio/Video Amplifiers , this part is included.Amp parts is a member of the family NCP2890 .The maximal Output Power of this electronic part is 1.08W kWh per hour.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.2V .There is a Single supply type on this electronic part.The maximal output current of 500mA makes it feature maximum design flexibility.
NCP2890AFCT2G Features
9-WFBGA, FCBGA package
9 pin count
NCP2890 family
1.08W kWh per hour
NCP2890AFCT2G Applications
There are a lot of ON Semiconductor NCP2890AFCT2G audio amplifiers applications.
- pH (acidity)
- Fast A/D and D/A converters, video amplifiers
- Comparator
- Test and measurement instruments
- Biopotential
- Precision measurement
- Vehicle electronics
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- Signal operation
