NCP3065PG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin (Sn) |
| Applications | Lighting |
| Voltage - Rated | 8V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 150kHz |
| Base Part Number | NCP3065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 75 % |
| Output Voltage | 8V |
| Output Type | Fixed |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 40V |
| Output Current | 1.5A |
| Max Output Voltage | 8V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 40V |
| Min Output Voltage | 3V |
| Current - Output / Channel | 1.5A Switch |
| Internal Switch(s) | Yes |
| Input Bias Current | -100nA |
| Dimming | Analog, PWM |
| Number of Segments | 2 |
| Switching Frequency | 250kHz |
| Multiplexed Display Capability | NO |
| Height | 3.429mm |
| Length | 10.16mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP3065PG Overview
Using its 8-DIP (0.300, 7.62mm) package, it is possible to save board space. For the design of this LED driver, 1 outputs are used.For mounting, it uses the Through Hole method.There is no doubt that this is a very efficient and reliable DC DC Regulator.When the temperature is -40°C~125°C TJ, it can work normally.Taking advantage of Lighting has considerable benefits.Frequency 150kHz is the basis of operation.In this case, there are 8 terminations.There are 8 pins on the base of this LED driver.The number of segments is estimated to be 2.There is a device mounted on the Through Hole.The LED driver can be found under the base part number NCP3065.On this device, there are 8 pins.As its minimal input voltage, it operates at 3V.The allowable maximum value of supply current reaches 40V.In this case, the load can only be supplied with 1.5A current.In order to power systems, 40V voltage is needed.When the switching frequency is maintained at 250kHz, this electronic component is able to fully play its functions.LED drivers deliver all their benefits with a maximum output current of 1.5A.The voltage at the output terminal is 8V.It is recommended that the output voltage be no higher than 8V.3V is the minimal voltage it outputs.There is a type Fixed output on this device.
NCP3065PG Features
Available in the 8-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TJ
Frequency of 150kHz
Supply voltage of 5V
Operating with the supply voltage of 40V
Switching frequency of 250kHz
Output voltage of 8V
NCP3065PG Applications
There are a lot of ON Semiconductor NCP3065PG LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- LED backlight driver for LCD displays for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
- Other Electronic Devices
- A- lamps
- Replacement lamps
