NCP380LMU10AATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP380LMU10AATBG Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).This package is included in 6-UDFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.This object belongs to the NCP380 family.There are 6 terminations in it.In order to operate, 6 pins are used.It contains 1 functions.The maximum output current must drop to 2.1A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 6 pins.It has 110mOhm resistance.It is set to 1A in this case.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.It is recommended to set the supply voltage to 5.5V for optimum efficiency.There is a maximum input voltage of 5.5V volts.Input voltage must be at least 2.5V volts.A total of 2 inputs are available.
NCP380LMU10AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380LMU10AATBG Applications
There are a lot of ON Semiconductor NCP380LMU10AATBG Power Switches ICs applications.
- USB Ports/Hubs
- USB Protection
- Portable GPS
- Notebook and Tablet Computers
- PC Cards
- Set-Top Boxes
- Hard Disk Drives
- Smartphone and PDA
- Hot Swaps
- USB Power Distribution
