NCP382LD10AAR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 570mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP382 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 3 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP382LD10AAR2G Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C for reliable performance.As a default, the output is set to 2.Operation is based on Not Required supply voltage.It produces a maximum output voltage of P-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It belongs to the NCP382 family.There are 8 terminations in it.During operation, the 8 pins are used.It consists of 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.In this LED driving board, there is 140mOhm resistance.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.It requires 2.5V volts as the minimum input voltage.3 inputs are provided.
NCP382LD10AAR2G Features
Supplied from 5V
Resistance of 140mOhm
2 channels
NCP382LD10AAR2G Applications
There are a lot of ON Semiconductor NCP382LD10AAR2G Power Switches ICs applications.
- HDD, SSD
- Mobile Communication Devices
- USB3.1 Power Delivery
- USB Ports/Hubs
- Hot-Swap Systems
- Wireless Modem Data Cards
- Smartphone and PDA
- Solid-State Drives
- Storage (HDDs, SSDs)
- Set-top-box
