banner_page

NCP4300ADG

5/30V 8 Amplifier NCP4300A 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP4300ADG
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 840
  • Description: 5/30V 8 Amplifier NCP4300A 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Number of Pins 8
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Amplifier
Terminal Finish Tin (Sn)
Max Operating Temperature 105°C
Min Operating Temperature 0°C
Applications Power Management
Voltage - Rated 35V
Packing Method RAIL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number NCP4300A
Pin Count 8
Number of Elements 2
Power Supplies 5/30V
Temperature Grade OTHER
Max Supply Voltage 35V
Min Supply Voltage 3V
Operating Supply Current 420μA
Nominal Supply Current 800μA
Output Current 25mA
Quiescent Current 210μA
Slew Rate 0.5 V/μs
Architecture VOLTAGE-FEEDBACK
Common Mode Rejection Ratio 40 dB
Halogen Free Halogen Free
Output Current per Channel 25mA
Reference Voltage 2.6V
Input Offset Voltage (Vos) 2mV
Bandwidth 700 kHz
Gain Bandwidth Product 700 kHz
Unity Gain BW-Nom 700 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.15μA
Power Supply Rejection Ratio (PSRR) 40dB
Low-Offset NO
Frequency Compensation YES
Low-Bias NO
Micropower NO
Bias Current-Max (IIB) @25C 0.15μA
Programmable Power NO
Input Bias Current 150nA
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status LAST SHIPMENTS (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)

NCP4300ADG Overview


In a Tube package, it is housed.Amplifier is a great value for the price.In order to use the 8-SOIC (0.154, 3.90mm Width) package, you will need the following.Mounting the part takes place in the direction of Surface Mount.Power Management is mainly where it finds its use.It is important to note that NCP4300A is the base part number for this device.It is used here to access high performance for amplification purposes by using the 2 functions.It is worth noting that there are 8 terminals in total, each having its own function.In the course of peak relowing, the iron temperature should be controlled under 260.There are total of 8 pins in this part.The amplifier should be powered at 5V volts to fully operate.You can use this amplifier for your custom applications by using the 8-pin connector.The device can operate at temperatures as low as 0°C.The fact that this part is capable of running at temperatures as high as 105°C is impressive.In order to enhance this product's design flexibility, Surface Mount is embedded.It is rated for a maximum supply voltage of 35V volts.Provided with a minimum of 3V watts.Voltage gain of 100dB is excellent on this amplifier.Power supplies for the part must be 5/30V-type.To keep the amplifier working normally, it is advised to set the supply current to 420μA.As a result of 2 basic elements, efficient amplification can be achieved.

NCP4300ADG Features



NCP4300ADG Applications


There are a lot of ON Semiconductor NCP4300ADG Special Purpose Amplifiers applications.

  • Radar
  • Logarithmic and exponential operation circuits
  • Power transmission
  • Precision measurement
  • Signal transformation
  • Digital cameras
  • High speed sample
  • Portable electronic products powered by batteries
  • Inverse/same-phase proportional circuit
  • ECG equipment

Write a review

Note: HTML is not translated!
    Bad           Good