NCP45540IMNTWG-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFDFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Power Good, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.24W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 750μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.75mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| On-State Resistance (Max) | 0.0077Ohm |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 4.8m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45540IMNTWG-H Overview
It is packaged in the form of a Tape & Reel (TR).There is a 12-VFDFN Exposed Pad package that includes it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Power Good, Slew Rate Controlled features in order for it to be useful.A total of 12 terminations have been found in it.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 20A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.This electrical component is part of the ecoSWITCH? series.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.For normal operation, the supply voltage (Vsup) should be kept above 3V.In this LED driving board, the analog IC SPST is employed.There are a total of 1 available channels.This part has a power supply of 3.3/5V volts.It has a maximum supply current of 0.75mA.
NCP45540IMNTWG-H Features
Supplied from 3.3V
1 channels
NCP45540IMNTWG-H Applications
There are a lot of ON Semiconductor NCP45540IMNTWG-H Power Switches ICs applications.
- PC Card Hot Swap
- USB Power Distribution
- Portable/Handheld Devices
- Portable GPS
- Set-top-box
- Smartphone and PDA
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Gaming
- USB3.1 Power Delivery
