NCP4894DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 2.2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP4894 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.1mA |
| Output Power | 1.8W |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 1.8W |
| Max Output Power x Channels @ Load | 1.8W x 1 @ 8 Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP4894DMR2G Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains an embedded device.Ideally, the chip should be packaged in a Tape & Reel (TR) case.10 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.This output is configured with 1-Channel (Mono) .The type of this electrical device is Class AB .As part of a signal interface in a computer or other communication device, there are 10 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .This electrical device is powered by 2.2V~5.5V volts.Amp parts is equipped wAmp partsh 1 channels.The operation of Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed -40°C~85°C TA °C.The device contains 10 pins.Amp parts is part of the NCP4894 family.As of this moment, the maximum Output Power of this electronic part is 1.8W kWh per hour.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.2V .A Single supply type is used for this electronic part.
NCP4894DMR2G Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
NCP4894 family
1.8W kWh per hour
NCP4894DMR2G Applications
There are a lot of ON Semiconductor NCP4894DMR2G audio amplifiers applications.
- Radar
- Medical instruments
- Video and image computer boards
- Signal operation
- High input resistance broadband
- High/low-pass filter circuit
- High-frequency data acquisition systems
- Band-stop filter
- Scintillation detectors
- Fission chambers
