NCP5050MTTXG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -10°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.7MHz |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 3.6V |
| Voltage - Output | 20V |
| Input Voltage (Min) | 2.7V |
| Topology | Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 3A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
NCP5050MTTXG Overview
On the board, there is also a 10-WFDFN Exposed Pad package that saves space.LED drivers with this design have 1 outputs.It adopts the way of Surface Mount for mounting.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is capable of working normally at -10°C~85°C TA.There are considerable benefits for Backlight, Camera Flash.Using the frequency of 1.7MHz, it operates.For its operation, 10 terminations are designed.If the voltage supply is less than 2.7V, undetermined failures will occur.The output voltage of this device is 20V.In addition, it is equipped with a total of 10 pins.There is an optimization that allows a maximum supply voltage of 5.5V.Device operation requires 3.6V volts from the circuit.When its input voltage exceeds 2.7V, its operation is convenient.Maintaining a low input voltage can ensure a high level of stability.It is not recommended that the output current exceeds 3A.
NCP5050MTTXG Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -10°C~85°C TA
Frequency of 1.7MHz
NCP5050MTTXG Applications
There are a lot of Rochester Electronics, LLC NCP5050MTTXG LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- White LED Backlight for portable equipment
- High-end retail lighting
- Amusement Machines
- Linear fluorescent
- OLED power supply for portable equipment
- LED headlights
- Down lights
