NCP5351DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -30°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP5351 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 16ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 8ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.037 µs |
| High Side Voltage - Max (Bootstrap) | 25V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP5351DR2 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.Configuration is supported by 2 drivers.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~6.5V supply voltage.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -30°C~125°C TJ.Input type of Inverting, Non-Inverting is used.8 terminations constitute its foundation.There are various related parts under its base part number NCP5351.The device is mounted with Surface Mount.Devices have 8 pins available.The device is specifically designed to operate at 5V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.Maximum (Bootstrap) voltage can be up to 25V.With its power supplies of 5V, it solves the power supply problems for diverse applications.
NCP5351DR2 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 25V
NCP5351DR2 Applications
There are a lot of ON Semiconductor NCP5351DR2 gate drivers applications.
- Motor Controls
- High-voltage isolated DC-DC converters
- Digitally controlled power supplies
- Active filtering
- High frequency line drivers
- A/D drivers
- Solar inverters
- Solar power supplies
- Industrial Modules
- Isolated Supplies for controller area network (CAN),
