NCP5612MUTBG
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFLGA Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 200mW |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Base Part Number | NCP5612 |
| Pin Count | 12 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 200mW |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Max Output Voltage | 5.7V |
| Voltage - Output | 4.8V~5.7V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | Analog |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Height | 550μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP5612MUTBG Overview
There is a 12-UFLGA Exposed Pad package on the board that is used to save space. This mounting method is Surface Mount.With high reliability and efficiency, this emerges as a DC DC Regulator.It is capable of working normally at -40°C~85°C TA.Backlight, Camera Flash has significant advantages.On the basis of the frequency 1MHz, it operates.In this case, there are 12 terminations.The LED light driver is configured with a base of 0 pins.The segment count is 2.There is a mounting of it by Surface Mount.A base part number of NCP5612 is associated with this LED driver.A maximum supply voltage of 7V is acceptable.A 4.8V~5.7V volt output voltage is provided by this device.There are 12 pins on it.In addition, its characteristics are classified into Display Drivers.At its minimal input voltage, it operates at 2.7V.The system operates at a minimum supply voltage of 2.7V in order to achieve maximum efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.The device can deliver high efficiency when the maximal supply current is less than 1mA.It is possible to supply the load with 60mA current.It is necessary to power systems with a voltage of 5.5V5.7V should be the maximum output voltage.
NCP5612MUTBG Features
Available in the 12-UFLGA Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
NCP5612MUTBG Applications
There are a lot of ON Semiconductor NCP5612MUTBG LED Driver ICs applications.
- High-end retail lighting
- LED Lightings for Industrial Equipment
- Linear fluorescent
- Auxiliary lights for on-vehicle cameras
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage Lighting and Signage
- Stage and Studio lighting
- Museum lighting
