NCS2200SN1T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCS220* |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Output Current | 70mA |
| Max Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCS2200SN1T1 Overview
A convenient packaging is provided in the form of SOT-23-5 Thin, TSOT-23-5 .This comparator is of the Complementary, Rail-to-Rail output type.Ready for shipping in Tape & Reel (TR) package.5 terminals are found on the comparator.The electrical component here belongs to the Comparators family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a General Purpose chip.In total, it contains 1 elements.Electronic comparator includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~105°C to avoid mal-function.The comparator consists of 5 pins.Try search NCS220* to get more pin-to-pin solutions for your special needs.A quiescent current of 17μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 15μA .A current supply greater than 15μA may result in the comparator malfunctioning.The maximal current your can input into the device is 1pA .The part is from NCS2200 comparator series.
NCS2200SN1T1 Features
Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2200SN1T1 Applications
There are a lot of ON Semiconductor NCS2200SN1T1 linear comparators applications.
- Security Detection Systems
- Window Comparators
- Current and voltage sensing
- Self-diagnostics
- Infotainment and Clusters
- Wearable Devices
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- Factory automation & control
- Threshold Detectors
