NCS2203SN2T1
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | NCS2200 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparators |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCS220* |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 15μA |
| Propagation Delay | 1.1 μs |
| Quiescent Current | 17μA |
| Response Time | 1100 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 0.85V~6V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 17μA |
| Voltage - Input Offset (Max) | 5mV @ 6V |
| Current - Input Bias (Max) | 1pA @ 6V |
| Hysteresis | 20mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
NCS2203SN2T1 Overview
The product is packaged in SOT-23-6 Thin, TSOT-23-6 for ease of transportation.The comparator has an output type of Open-Drain, Rail-to-Rail .The chip is packaged with Tape & Reel (TR) .The device is designed with 6 terminations.The component belongs to the Comparators family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.When it comes to types, this comparator is a typical General Purpose .This element consists of 1 elements in total.The device is equipped with 6 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~105°C .There are 6 pins on the comparator.Try search NCS220* to get more pin-to-pin solutions for your special needs.A quiescent current of 17μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 15μA for normal use.Electronic comparator is possible to input a maximum current of 1pA into the device.This part is from the NCS2200 comparator series.
NCS2203SN2T1 Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 17μA
NCS2203SN2T1 Applications
There are a lot of ON Semiconductor NCS2203SN2T1 linear comparators applications.
- Limit Comparators
- Factory automation & control
- Laptop Computers
- Window Comparators
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Building automation
- Wearable Devices
