NCV1060BD100R2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 7.2W |
| Power Rating | 1.7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G16 |
| Output Voltage | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 8.4V~9.5V |
| Control Features | Soft Start |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.52A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Power, Over Voltage, Short Circuit |
| Output Isolation | Either |
| Voltage - Breakdown | 670V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
NCV1060BD100R2G Overview
10-SOP (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tape & Reel (TR) .It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.As a result, the switching frequency reaches 100kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.4V~9.5V , the AC/DC converter may be used.There have been 16 terminations of this program.It is a member of Automotive, AEC-Q100 manufacturer family.It produces a voltage of 9V .An amount of current of 0.52A is the maximum that can be supplied to the ac to dc inverter.It is important to keep this AC to DC converter set to 14V .
NCV1060BD100R2G Features
Packaged with 10-SOP (0.154, 3.90mm Width)
Switching Frequency at 100kHz
NCV1060BD100R2G Applications
There are a lot of ON Semiconductor NCV1060BD100R2G AC DC Converters applications.
- Tablets
- Power adapters for monitors
- Adapter for ADSL
- Standby Power Supply
- Adapter/Charger for Cell
- Digital cameras
- Air Conditioning
- Home Appliance Applications
- Battery chargers for cordless
- USB-PD 2.0
