NCV7608DQR2G
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Base Part Number | NCV7608 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Max Output Current | 250mA |
| Power Supplies | 3.5/5V |
| Voltage | 5.25V |
| Interface | SPI |
| Operating Supply Current | 3mA |
| Current | 350mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 350mA |
| Rise Time | 12μs |
| Fall Time (Typ) | 12 μs |
| Voltage - Load | 5.5V~28V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting, Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Turn On Time | 50 µs |
| Rds On (Typ) | 1.2 Ω |
| Turn Off Time | 100 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Load Type | Inductive, Capacitive, Resistive |
| Height | 2.5mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BFSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Applications | DC Motors, Lamps, Relays |
| Subcategory | Peripheral Drivers |
| Technology | Power MOSFET |
| Voltage - Supply | 3.15V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
NCV7608DQR2G Overview
To package H bridge, use Tape & Reel (TR).H bridge is provided in the 36-BFSOP (0.295, 7.50mm Width) Exposed Pad package for the sake of cost savings.Improved reliabilbridge drivery can be ensured based on the supply voltage of 3.15V~5.25V.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge works normally at -40°C~150°C TJ's operating temperature.H bridge motor driver has many applications, including DC Motors, Lamps, Relays.Mount the board using Surface Mount.Among full bridges specific characteristics is Slew Rate Controlled, Status Flag.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 36 terminations.As H bridge ic of a signal interface, 36 pins are used as pronged contacts.Its base H bridge ic number, NCV7608, is used to identify related H bridge ics.To operate H bridge circuit, a voltage supply of 3.3V is required.This is an electronic H-bridge that belongs to the Automotive, AEC-Q100 series.When the ambient temperature reaches 250mA, the maximum load current of the power supply is reached.The power supply pins and the output pins are conducting a current of 350mA.It is through 36 pins that this bridge driver is able to perform its specific functions.It is equipped with outputs in the form of 8.This H bridge motor driver belongs to the subcategory of Peripheral Drivers and shares several similarities with other parts in that category.A load of electricity is supplied by 3.5/5V.
NCV7608DQR2G Features
Available in 36-BFSOP (0.295, 7.50mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : NCV7608
NCV7608DQR2G Applications
There are a lot of ON Semiconductor NCV7608DQR2G Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for CPUs
- DVD players
- Optical disc drives
- VTR
- Desktop Computers
- Voltage Regulators
- Notebook Computers
- OA equipments
- CD players
- High-Performance Gaming Motherboards
