NIF5002NT3G
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | HDPlus™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 165mOhm |
| Terminal Finish | Tin (Sn) |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NIF5002N |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 1.1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 42V |
| Continuous Drain Current (ID) | 2A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 14V |
| Voltage - Load | 42V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 30 µs |
| Output Peak Current Limit-Nom | 5.7A |
| Rds On (Typ) | 165m Ω |
| Drain to Source Resistance | 165MOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NIF5002NT3G Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the TO-261-4, TO-261AA package.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -55°C~150°C TJ.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.Auto Restart, Slew Rate Controlled features are available on the lighting driver.I believe it belongs to the NIF5002N family.In order to operate, the 4 pins are used.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.4 pins are connected to it in total.165mOhm resistance is present in the lighting driver.It is part of the HDPlus? series.
NIF5002NT3G Features
Resistance of 165mOhm
NIF5002NT3G Applications
There are a lot of ON Semiconductor NIF5002NT3G Power Switches ICs applications.
- PC Card Hot Swap
- USB Power Distribution
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Storage Drives
- USB Ports/Hubs
- Hot-Swap Systems
- Portable/Handheld Devices
