NLAS4053DT

23ns, 23ns SPDT 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4053 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: ON Semiconductor
Nocochips NO: 598-NLAS4053DT
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 639
Description: 23ns, 23ns SPDT 26Ohm Analog Switches BREAK-BEFORE-MAKE NLAS4053 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status	OBSOLETE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	33Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	3
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	NLAS4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	5.5V
Min Supply Voltage	2.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	40μA
Throw Configuration	DPST
Propagation Delay	23 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	3V~5V ±3V
Supply Type	Dual, Single
Bandwidth	145MHz
Supply Current-Max (Isup)	0.08mA
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	3.3V
-3db Bandwidth	180MHz
On-State Resistance (Max)	26Ohm
Min Dual Supply Voltage	1.25V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 23ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	10 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	28ns
Switch-off Time-Max	28ns
Signal Current-Max	0.05A
Height Seated (Max)	1.2mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Lead Free

NLAS4053DT Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -55°C~125°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 2 channels. A 3V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. These analog multiplexers are built based on SPDT switching circuits. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with NLAS4053. In this multiplexer, the internal resistance is 33Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2.5V should be the lowest voltage fed to the electronic component. This multiplexer would work with 40μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 3.3V. If you are using dual power supplies, you should attach at least 1.25V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. A 145MHz-bandwidth can be used for data transfer.