Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-WFQFN |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
Resistance |
400mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NLAS5223 |
Pin Count |
10 |
Number of Outputs |
4 |
Operating Supply Voltage |
3V |
Number of Channels |
1 |
Max Supply Voltage |
4.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
1μA |
Turn On Delay Time |
50 ns |
Number of Inputs |
2 |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Turn-Off Delay Time |
30 ns |
-3db Bandwidth |
19MHz |
On-State Resistance (Max) |
350mOhm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
500nA |
Channel Capacitance (CS(off), CD(off)) |
60pF |
On-state Resistance Match-Nom |
0.05Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
50ns, 50ns |
Charge Injection |
38pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω (Max) |
Crosstalk |
-70dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.65V~4.5V |
Height Seated (Max) |
0.8mm |
Length |
1.8mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLAS5223BLMNR2G Overview
Shipping overseas is convenient with the electronic component packed in 10-WFQFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. In total, 10 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 10 pins. SPDT switching circuits are used in these analog switch ics. Try searching for NLAS5223 variants of the analog switch ic. The internal resistance of this digital multiplexer is 400mOhm. Please refer to the datasheets for 10 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 4.5V. A cost-effective Single supply type analogue multiplexer. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 1μA current. This analogue multiplexer requires a voltage of 1.65V~4.5V when it drains from a single voltage supply. A voltage of 3V can be used to operate the electronic component. Operating the 2 inputs requires 2 inputs. The analog switch ics has 4 outputs.
NLAS5223BLMNR2G Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 19MHz
NLAS5223BLMNR2G Applications
There are a lot of ON Semiconductor NLAS5223BLMNR2G Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision instrumentation
- ISDN NT1/TA
- Audio and video switching
- Digital access cross connects
- Cable PC
- Wireless Local Loop
- Digital cross connects (DSX-1)
- Mechanical reed relay replacement
- Switching Systems