NLSV8T240MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFDFN |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Feature | Over Voltage Protection, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Base Part Number | NLSV8T240 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 900mV |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 1.6 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.3 ns |
| Family | 8T |
| Logic Function | Translator |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.9V~4.5V |
| Voltage - VCCB | 0.9V~4.5V |
| Height Seated (Max) | 0.55mm |
| Length | 4mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLSV8T240MUTAG Overview
There is an embedded version of it in package 20-UFDFN.Packaged as Tape & Reel (TR).Level translators is configured wlevel translatorsh an output of Tri-State, Non-Inverted.Level translators has the translator type Voltage Level.Level translators is mounted according to the Surface Mount method.This electrical device has channel type Unidirectional.During operation, the temperature is set to -40°C~85°C TA.1 circuits are used to achieve its superior flexibility.Transmission lines are terminated using 20 terminations.There is a base part number NLSV8T240 that refers to the related parts.There is a voltage supply of 1.2V which powers the device.There are 20 pins on this device.In addition, it is designed with a pin number of 20.This electronic part is designed with 8 Bits.Voltages above 4.5V are supported.A voltage of 900mV is the minimum supply voltage required for it to operate.0.9V~4.5V is the supply rail configuration on the VCCA.0.9V~4.5V is the configuration of the VCCB supply rail.Mounting this electronic component is done using the Surface Mount method.There are a total of 8 channels.As part of Bus Driver/Transceivers, it belongs.There is BUS TRANSCEIVER logic IC in it.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electronic device belongs to the family of 8T.Without external influences, it consumes 4μA of quiescent current.Whenever the operation is performed, Over Voltage Protection, Power-Off Protection will be guaranteed.
NLSV8T240MUTAG Features
20-UFDFN package
1 circuits
20 pin count
20 pins
NLSV8T240MUTAG Applications
There are a lot of ON Semiconductor NLSV8T240MUTAG voltage translators & level shifters applications.
- Enterprise
- Eliminate slow or noisy input signals
- Smartphone
- Industrial Equipment
- Electronic Points of Sale
- Notebook
- Wearable Health and Fitness Devices
- Available in Military (-55°C to 125°C)
- Automotive infotainment
- One Fabrication Site
