banner_page

NLSX4014MUTAG

Surface Mount 12 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 12-UFQFN Active 2 Weeks Weeks1 (Unlimited)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NLSX4014MUTAG
  • Package: 12-UFQFN
  • Datasheet: PDF
  • Stock: 433
  • Description: Surface Mount 12 pinsTape & Reel (TR) Voltage Translators & Level Shifters 1 Voltage Level 12-UFQFN Active 2 Weeks Weeks1 (Unlimited) (Kg)

Details

Tags

Parameters
Supply Voltage 2.8V
Base Part Number NLSX4014
Pin Count 12
Output Type Tri-State, Non-Inverted
Number of Channels 4
Number of Circuits 1
Max Supply Voltage 4.5V
Min Supply Voltage 900mV
Number of Ports 2
Output Current 20μA
Number of Bits 4
Propagation Delay 250 ns
Quiescent Current 2μA
Turn On Delay Time 9.3 ns
Logic Function Level Shifter, Translator
Data Rate 140Mbps
Output Characteristics 3-STATE
Halogen Free Halogen Free
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -20μA
Channel Type Bidirectional
Low Level Output Current 20μA
Translator Type Voltage Level
Voltage - VCCA 0.9V~4.1V
Voltage - VCCB 1.3V~4.5V
Height Seated (Max) 0.55mm
Length 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 21 hours ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-UFQFN
Number of Pins 12
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2007
JESD-609 Code e4
Feature Auto-Direction Sensing
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 12
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Terminal Position QUAD
Number of Functions 1

NLSX4014MUTAG Overview


Embedded in the 12-UFQFN package, it is available for you to use.Tape & Reel (TR) is the packaging method.Tri-State, Non-Inverted is used for the output it is configured with.This electrical device has a translator type of Voltage Level.Surface Mount is used to mount this electronic part.Bidirectional is the Channel type of this electrical device.Operation is performed at -40°C~85°C TA.Its superior flexibility is achieved by using 1 circuits.When it comes to terminating a transmission line, there are 12 terminations.According to the base part number NLSX4014, its related parts can be founded.Level translators is powered by a 2.8V supply.There are 12 pins on it.Level translators has 12 pins.There are 4 bits in this electronic part, which means it is designed in such a way.Voltages above 4.5V are supported.A voltage of 900mV is the minimum supply voltage required for it to operate.0.9V~4.1V is the supply rail configuration on the VCCA.1.3V~4.5V is the supply rail configuration on the VCCB.Mounting this electronic component is done using the Surface Mount method.There are a total of 4 channels.Level translators uses the logic IC BUS DRIVER.2 terminations are the practice of terminating a transmission line with a device matching its characteristic impedance.Without external influence, it consumes 2μA of quiescent current.When operating, Auto-Direction Sensing can be ensured.Featuring a 20μA output current, its design flexibility is maximized.

NLSX4014MUTAG Features


12-UFQFN package
1 circuits
12 pin count
12 pins

NLSX4014MUTAG Applications


There are a lot of ON Semiconductor NLSX4014MUTAG voltage translators & level shifters applications.

  • One Fabrication Site
  • MDIO
  • Notebook
  • Telecom
  • Signaling Level Conversion for Clock or Data
  • Advanced Driver Assistance System (ADAS)
  • Personal computers
  • Extended Product-Change Notification
  • Routers (routing equipment)
  • Debouncing a Mechanical Switch

Write a review

Note: HTML is not translated!
    Bad           Good